Niu Mawang (ring tight) high-strength strapping steel wire mesh 1. Performance characteristics: This product generally uses hot-dip galvanized low-carbon steel wire, and can also use medium-carbon high-strength steel wire (black wire), which are all automatically braided to produce square holes (rolls) network). As the warp and weft crossing points are locked by spring winding, the side lines on both sides are tightened around, which does not damage the galvanized layer on the surface of the steel wire. At the same time, the net is strengthened after the crossing points are strengthened. This product has a novel structure, firm and tight, flat mesh surface, uniform mesh, strong integrity, strong toughness, not close together, non-slip, compression resistance, weather resistance, and the service life is generally up to several decades, even if it is partially cut and partially under pressure It is not prone to loosening, and its performance is better than welding and braided steel wire mesh. It is a new generation product that cannot be compared and replaced by ordinary steel wire mesh. Product specifications: Wire diameter: Φ2.0 ～ 2.6mm Side line Φ3.1 ～ 3.2mm Mesh: 2 "× 4" (50.8 × 101.6mm) 4 "× 4" (101.6 × 101.6mm) Mesh width: 4 "～ 6" (1220 ～ 1828.8mm) Net length: 50 "～ 100" (15.24 ～ 30.48m) Tensile strength of warp and weft wire: 1200 ～ 1600MPa Tensile strength of bundling wire: 400 ～ 500MPa Pressure resistance of bundling point: 1300 ～ 1500N 3. Product use: Niu Ma Net is a kind of protective fence net widely used in Europe and America to protect the ecological balance, prevent landslides, animal husbandry fences, highways, railways, etc. If the height wire is used, it can also be used for infrastructure such as roads, bridges, concrete, prefabricated plates. It is an alternative to lightweight high-strength reinforcement mesh.